how to change nat type to open netgear router

The customer service representative said I needed to get a UDP and TCP port open. I'm trying to get my Sony PlayStation 3 to work. Do a test, it should say open.I am trying to open a TCP port and UDP port for my Netgear router? Turn the power off of your 360 and your router (unplug the power to the router), wait 20 seconds and plug the power back in the router. (To remove the default DMZ server, replace the IP address numbers with all zeros.) Click the Advanced tab, then Click WAN Setupģ. With Port Forwarding Selected, delete any rules with Ģ. If 'password isn't the password, try 'admin' or try leaving it blank. Type admin for user name, and password should be 'password'. That should bring up the login for your Netgear router. open your internet browser and type 192.168.1.1 into the browser. Then turn the power off of your 360 and your router (unplug the power to the router), wait 20 seconds and plug the power back in the router. Server IP address: Enter your Xboxes IP address With Port Forwarding Selected, delete any rules with 88, and 3074 With Port Triggering selected, delete any rules with 88, and 3074 Open your internet browser and type 192.168.1.1 into the browser. Now do the real test and connect to some games, you should get in any game that isn't full.īEFORE YOU CONTINUE, MAKE YOUR XBOX'S IP ADDRESS STATIC!!! Now turn the power off of your 360 and your router (unplug the power to the router), wait 20 seconds and plug the power back in the router. With Port Triggering Selected, delete any rules with 88 or 3074 With Port Forwarding selected, delete any rules with 88 or 3074 Go to port forwarding/port triggering - This is what worked for me/ make sure THERE IS NO STATIC IP, Make it automatic. If password isn't the password, try 'admin' or try leaving it blank. (used***** for this guide):No need for a static IP address using this method. If you do this, be prepared to redo your wireless devices too, and be sure to set up your wireless security again. If you reset your router and run the initial setup wizard again, it should work. I can't find that entry anywhere, I'm guessing that there's some UPNP that's trying to open the ports.

:) Here's my written description.īEFORE YOU START: I've found that sometimes when trying to enter the 3074 rule when triggering or forwarding, you may get a conflict error, saying that the port is already being forwarded or something. Couple of methods to help open your NAT type.

How to change nat type to open netgear router